Highlights and Advantages
- Pre-washes, ultrasonically washes, rinses and dries in one automatic cycle, with no hand cleaning
- Compact bench-top unit with a 10-litre tank that takes a full load from a 24-litre autoclave
- 3 pre-set washing programmes and 6 ultrasonic cleaning programmes, plus custom cycles
- Half-load option, and ECO mode that uses 30% less detergent with the same cleaning performance
- Full traceability by USB and Ethernet (both included)
The Euronda Eurosafe Smart is a multifunctional bench-top tank for practices that want to automate instrument cleaning and disinfection. It washes and dries instruments in one fast, automated, repeatable and traceable process. Used with Euronda’s multi-enzymatic detergent and disinfectant Sanifizer Automatic, it combines the efficiency of ultrasonic washing with cleaning and disinfection of the load, while protecting your instruments. Used together, Eurosafe Smart and Sanifizer Automatic meet the requirements of EN 15883-5.
For larger loads and thermal disinfection, see the Euronda Eurosafe 60.
Practical and easy to use
- Top-opening lid: easy to load and inspect, and only 78 cm of height clearance is needed
- Front cartridge compartment: refill Sanifizer Automatic quickly and safely
- Automatic dosing: the dispenser draws just the right amount of detergent for the programme and load, so nothing is wasted
- Built-in water softener: monitors resin regeneration and warns when salt is low. The front salt compartment can be refilled even while the machine is running
- 4.3″ touchscreen: simple, intuitive menus to choose a programme or customise the load, duration, temperature, drying and detergent concentration
- Two stainless steel shelves make the most of the space in the tank
How the cycle works
- Pre-washing: cold water removes organic matter and surface dirt
- Washing: at 40 °C, Sanifizer Automatic is added for combined cleaning and disinfection. Its neutral pH is safe for even delicate materials. Ultrasonic washing then removes stubborn soiling such as dirt, cement and debris, including from the inside surfaces of instruments.
- Rinsing: removes any detergent residue
- Drying: air at 120 °C leaves the load dry and ready for packaging
Each ultrasonic programme runs through four phases: Degas removes dissolved gas from the water so cavitation works better; Boost raises the power for stubborn dirt; Normal provides everyday cleaning; and Sweep varies the frequency slightly for even cleaning throughout the tank.
Pre-set washing programmes
| Pre-wash | Standard | Intensive | |
|---|---|---|---|
| Best for | Stopping organic residue drying on instruments before the next wash | Normally soiled instruments | Instruments with stubborn soiling |
| Total cycle time* | 3 min | 45 min | 53 min |
| Pre-wash / wash / rinse | 3 / – / – min | 3 / 22 / 8 min | 3 / 27 / 8 min |
| Drying | – | 120 °C for 12 min | 120 °C for 12 min |
| Water / electricity | 3.5 L / 0.1 kWh | 24 L / 0.5 kWh | 24 L / 0.5 kWh |
| Sanifizer Automatic | No | Yes | Yes |
| Options | – | ECO, half load | ECO, half load |
Ultrasonic cleaning programmes
| Programme | Total time* | Temperature |
|---|---|---|
| Instruments | 20 min | 40 °C |
| Burs | 10 min | 40 °C |
| Impression trays** | 40 min | 60 °C |
| Cement removal | 10 min | 30 °C |
| Plaster removal** | 30 min | 60 °C |
| Prostheses** | 40 min | 60 °C |
*Times exclude drying and water filling and emptying. **Sanifizer Automatic is optional in these programmes.
Traceability
At the end of every cycle, Eurosafe Smart creates a file with all the process data (outcome, duration, amount of detergent and operator). Transfer it to a PC by USB or Ethernet, and manage it with Euronda’s E-Data and E-Memory software. Up to twenty password-protected users can be set up.
Accessories
- Supplied: lower stainless steel mesh shelf (loading area 28 × 18 × 6 cm) for loose instruments, instrument holders and the bur block, used on its own for half loads; upper stackable mesh shelf (28 × 18 × 3 cm); and a 1 kg bag of regenerating salt with funnel
- Optional: bur block basket for burs and small parts; pair of five-place silicone holders for surgical instruments
Technical specifications
- Chamber capacity: 10 L
- Dimensions (W × H × D): 46 × 45.5 × 61 cm with lid closed; 46 × 77.5 × 61 cm with lid open
- Weight: 45 kg
- Power: 230 V / 50 Hz, 2300 W
- Connectivity: USB and Ethernet included
- Inside: 4 ultrasonic transducers, 2 fans with heating elements for forced drying, 2 water heaters, HEPA filter and integrated anti-flooding system
- Classification: Class I medical device
